Product ID:CHEMICAL VULCANIZING CODE 21,PART B
MSDS Date:11/22/1985
FSC:2640
NIIN:00-102-0978
Kit Part:Y
MSDS Number: BCYQH

TRUFLEX RUBBER PRODUCTS CO

1667 N MAIN ST TERMINAL ANNEX
LOS ANGELES, CA 90051
US

Emergency Phone: 213-224-6300

Info Phone: 213-224-6300

Cage: 28954

TRUFLEX/PANG RUBBER PRODUCTS CO

LOS ANGELES, CA 90012 US

Telephone: 213-224-6300

Cage: 28954

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 90-97%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NATURAL RUBBER, TACKIFIERS AND ACCELERATORS

Fraction By Weight: 3-8%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE HAZARDS-EYE CONTACT:IRRITATION.
SKIN:IRRITATION,DERMATITIS. INHALATION:IRRITATION,CENTRAL NERVOUS
SYSTEM EFFECTS,UNCONSCIOUSNESS,EVEN DEATH. INGESTION:LOW ACUTE
TOXICITY. CHRONIC HAZARDS:LIVER A ND KIDNEY DAMAGE.
Explanation of Carcinogenicity:MANUFACTURER STATES NO CARCINOGENIC
INGREDIENTS.
Effects of Overexposure:EYES:PAIN,IRRITATION. SKIN:IRRITATION.
INHALATION:IRRITATION,DIZZINESS,NAUSEA,LIGHTHEADEDNESS,HEADACHE,LOS
S OF EQUILIBRIUM,UNCONSCIOUSNESS,EVEN DEATH. INGESTION:LOW ACUTE
TOXICITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:FIRST AID-EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
SKIN:WASH WITH SOAP AND WATER WHILE REMOVING CONTAMINATED CLOTHING.
INHALATION:REMOVE TO FRESH AIR.GIVE OXYGEN/CPR IF NEEDED.SEE
DOCTOR. INGEST ION:DO NOT INDUCE VOMITING,IF CONSCIOUS,DRINK LARGE
QUANTITIES OF WATER.SEE DOCTOR.

Flash Point:NONE
Lower Limits:7.5
Upper Limits:15
Extinguishing Media:WATER FOG
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:CONCENTRATED VAPORS CAN BE IGNITED WITH A
HIGH ENERGY SPARK, FLAME OR OTHER HIGH INTENSITY HEAT SOURCE.
BURNING CAN PRODUCE HCL OR POSSIBLE TRACES OF PHOSGENE.

Spill Release Procedures:USE APPROPIATE PROTECTIVE CLOTHING AND
EQUIPMENT. ABSORB IN INERT MATERIAL, AND PLACE IN APPROPIATE
DISPOSAL CONTAINER AND SEAL. FLUSH AREA WITH SOAP AND WATER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP AWAY
FROM FLAMES AND IGNITION SOURCES. ALUMINUM IS NOT ACCEPTABLE
MATERIAL FOR TANKS, FITTINGS, ETC.
Other Precautions:VAPORS ARE HEAVIER THAN AIR, AND WILL COLLECT IN LOW
AREAS. USE SPECIAL BREATHING APPARATUS AND HAVE OBSRVER PRESENT IF
ENTERING SUCH AREAS.

Respiratory Protection:USE NIOSH/MSHA-APPROVED ORGANIC VAPOR RESPIRATOR
FOR EMERGENCIES.
Ventilation:LOCAL EXHAUST PREFERRED,MECHANICAL EXHAUST ACEPTABLE.
Protective Gloves:NEOPRENE OR VITON.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
PROLONGED/REPEATED CONTACT. EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
KEY1:T4. THIS NSN REPRESENTS A KIT WHICH CONSISTS OF 5 PARTS. EACH PART
HAS ALSO ITS OWN SEPARATE NSN'S (3 PARTS-PATCHES, 2 PARTS-HAZARDOUS
MATERIALS). --ANAESTHETIC EFFECTS MAY BE SEEN IN THE RANGE O F
500-1000 PPM. OVER 1000 PPM MAY CAUSEDIZZINESS. OVER 10000 PPM CAN
CAUSE UNCONSCIOUSNESS AND DEATH--.

HCC:T4
Boiling Pt:B.P. Text:165F/74C
Melt/Freeze Pt:M.P/F.P Text:-49F,-45C
Vapor Pres:100
Vapor Density:4.55
Spec Gravity:1.32
Evaporation Rate & Reference:0.35 (ETHYL ETHER = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN LIQUID, WITH ETHER LIKE ODOR.

Stability Indicator/Materials to Avoid:YES
CONTAMINATION WITH CAUSTIC SODA, CAUSTIC POTASH OR OXIDIZING MATERIAL
MAY FORM SHOCK SENSITIVE EXPLOSIVES.
Stability Condition to Avoid:OPEN FLAMES, HOT GLOWING SURFACES OR
ELECTRIC ARCS.
Hazardous Decomposition Products:MAY EMIT HCL AND/OR PHOSGENE GAS WHEN
INVOLVED IN BURNING

Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER.
MANUFACTURER RECOMENDS DISPOSAL IN A PERMITTED HAZARDOUS WASTE
MANAGEMENT FACILITY. COMPLY WITH ALL APPLICABLE FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.